Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterCraftsman Weather Seal Replacement: The McKinney Owner’s Guide
A Craftsman weather seal replacement in McKinney typically runs $90-$180 installed, and we stock the common profiles on the truck so most jobs are done same-day. The part itself is the rubber or vinyl strip that runs along the bottom of your garage door, and it’s usually discovered as a problem when daylight shows under the door, water seeps in after a North Texas storm, or you spot cracked, flattened rubber that no longer touches the concrete.
Most McKinney homeowners notice it after a heavy rain. The floor of the garage stays damp in one corner, or leaves and dirt start collecting along the back wall. The seal compresses over time, especially on doors that face west and take the full afternoon sun, and once it’s split or shrunken, it stops doing its job. The fix is straightforward when the part is matched correctly.
Which Craftsman Models This Applies To
Craftsman garage doors came through several manufacturers over the years, so the weather seal profile depends on what’s stamped on the door tag, not just the brand name. Most Craftsman residential doors in McKinney fall into one of two camps: a T-style bottom seal that slides into a single aluminum retainer channel, or a bulb-style seal that tucks into a double-channel retainer. They are not interchangeable, and forcing the wrong one into place is how seals get torn within a season.
Check the door section near the bottom panel. There’s usually a white or silver sticker with a model/serial number, and the retainer style is visible without removing anything. We match by measuring the channel width and the old seal’s bead profile. For Craftsman doors made through the mid-2010s, the T-profile with a 5/16-inch bead is the most common. Older Craftsman doors sometimes use a 1/4-inch bulb. We keep both profiles stocked, plus universal-cut options for odd sizes.
OEM Craftsman weather seal is fine, but the aftermarket equivalents from established suppliers often use a more UV-stable vinyl compound that lasts longer in Texas heat. We don’t push one over the other blindly. If your door is two years old, OEM makes sense. If it’s seven years old and the first seal died from sun exposure, an upgraded aftermarket vinyl may outlast what came on the door. We’ll show you both and quote the difference in writing.
Signs Your Craftsman Weather Seal Replacement Is Failing
- Visible daylight under the door. When the door is closed and you can see a sliver of light along the floor, the seal has compressed or torn. That gap is also where dirt, rain, and mice get in.
- Water pooling near the door slab after rain. A worn seal can’t redirect water away from the opening. In McKinney, spring storms with wind-driven rain make this the most common first sign.
- Flattened or cracked rubber along the bottom edge. The seal’s profile should be round and springy. Once it flattens or develops lengthwise cracks, it’s lost its compression memory and won’t recover.
- Higher indoor temperature in the garage. A failed seal lets heat pour in during July and August. It’s not just comfort; it raises cooling costs if the garage shares a wall with the house.
- The seal has pulled away from the retainer. One end hangs loose or the strip has slid sideways, leaving a bare gap on one corner. This usually means the retainer itself is bent or the old seal was never seated correctly.
BeforeAfterReplacement Cost & What’s Included
Weather seal replacement on a Craftsman door in McKinney runs $90-$180 installed, depending on door width and whether the retainer channel needs replacement. A 16-foot door uses more material than a single-car door, and if the aluminum retainer is corroded or bent, that adds to the parts total. We’ll tell you the exact number before any work starts.
That price includes the seal material, removal of the old profile, cleaning of the retainer channel, installation, and a photo record of what was found and what was done. Clause 1 of The Haven Standard means the written quote you approve is the price you pay. No surprise line items after the fact. We also check that the new seal contacts the floor evenly across the full width, because an uneven concrete pad can leave gaps that no seal alone will fix. The labor is covered by our 365-Day Done Right Promise.
DIY or Call Us?
Replacing a bottom weather seal is one of the few garage door repairs a determined homeowner can attempt without serious risk. There’s no spring tension involved, and the part doesn’t hold any load. The honest complication is matching the profile, trimming to length, and getting the seal to slide through the retainer without folding or tearing it in the process. Doable, but most people spend an hour fighting the old seal out of the channel.
The part where DIY actually gets expensive is a bent retainer. If someone uses a screwdriver to pry out the old seal and deforms the aluminum channel, the new seal won’t seat and the door won’t seal flat. We see about one of those a month in McKinney. If the old seal is hard, cracked, and stuck, give us a call at (469) 815-7610. We have the right tools and the right profiles on hand.
FAQs
A Craftsman weather seal in McKinney typically lasts 3-5 years, though west-facing doors that take direct afternoon sun often need replacement sooner. The UV exposure in Collin County summers is the biggest factor. Call (469) 815-7610 if yours is cracked or flat; we’ll give you a written quote before touching anything.
No, and we’ll tell you that straight: a torn or cracked seal can’t be reliably patched. The tear propagates as the door cycles, and adhesives don’t hold on UV-aged rubber. Replacement is the only fix that lasts. We’ll show you the failed section in a photo before we quote the replacement.
Most Craftsman weather seal replacements take 30-60 minutes on site. It’s a one-technician job, assuming the retainer channel is in usable shape. If the retainer needs replacement, add 15-20 minutes. We’ll confirm the scope in the written quote before work starts.
Yes. We carry the common Craftsman T-profile and bulb-style profiles in both standard lengths on every service vehicle, so we can match your door the same day. For unusual sizes, we order the correct profile and schedule a return visit. We also carry parts for LiftMaster, Chamberlain, and Genie doors.
Get a Flat, Written Price Before Any Work Starts
If your Craftsman door is letting daylight, water, or Texas heat into the garage, we’ll show you the failed seal, quote the replacement in dollars before we start, and send you a photo record of the finished work when we leave. That’s how Servo Garage Doors McKinney has done it since 2015, and it’s written into The Haven Standard. Call (469) 815-7610 and talk to a real person, 24/7.
Written by Marcus Deller, Owner, Servo Garage Doors McKinney at Servo Garage Doors McKinney, serving McKinney and nearby areas.